Refresh Your Fence Without Replacing It
Your boundary fences take a massive beating from constant sun exposure, high humidity, and driving Texas rain storms. Over time, wood fences turn a dull, dead gray from UV damage, while collecting thick coatings of mud splash and ground grit. Cleaning these areas requires a highly balanced approach, too much pressure will permanently gouge wood fibers, leaving ugly splintered patterns. Sunset Wash applies precise, controlled pressure washing methods that sweep away weathered gray cells, dirt, and dried mud, revealing the gorgeous, vibrant wood surfaces underneath.
What’s Included
Property Alignment Check
We evaluate the fence lines for structural integrity and ensure gate hardware is clear before starting our wash process.
Loose Mud Knockdown
We utilize a wide-angle spray pattern to gently knock down thick mud accumulation, clay splatters, and heavy dust layers.
Controlled Wood Fiber Wash
Using calibrated, low-impact pressure settings, we cleanly sweep away weathered gray wood fibers without fraying or gouging the boards.
Post-Wash Grain Alignment
We sweep our washing tips uniformly with the natural grain of the wood, ensuring a smooth, visually seamless surface when dried.
Surrounding Area Cleardown
We perform a final clear water rinse of the fence base, clearing away all dislodged wood fibers from your grass and landscape lines.
Why It Matters
A dirty fence can drag down the appearance of the entire property. Fence cleaning helps:
Extends Fence Lifespan
Stripping away deeply embedded dirt and damp environmental grime prevents premature material degradation, saving thousands in replacement costs.
Drastic Curb Appeal Boost
Removing the weathered gray layer instantly restores a warm, natural golden tone that completely frames your backyard beautifully.
Prepares Surfaces for Staining
If you plan to stain or seal your fence, our deep pressure wash creates a perfectly clean, porous surface for maximum adhesion.
FAQ
Sun exposure damages surface wood cells, turning them gray over time. Our controlled pressure washing process strips that dead layer away, exposing healthy wood underneath.
No. We do not use hyper-focused blasting tips. We use specialized wide-spray nozzles and back off the pressure to ensure wood fibers remain intact.
We strongly advise allowing the wood to dry completely under sunny conditions for at least 48 hours before applying any oil or water-based stains.
Yes. We can easily adjust our pressure settings to deep-clean masonry columns, brick bases, or stone accents seamlessly alongside the wood layouts.
Turn Your Weathered Fence Into a Pristine Boundary
Don’t let weathered wood and dingy boundary lines spoil your outdoor relaxation. Reach out to Sunset Wash today to secure your custom fence wash quote.